Applications:
Widely used in a variety of production sites. To measure the surface roughness of a variety of machined parts based on the selected measurement conditions, calculate and clearly show all the appropriate parameters in the LCD display.
 
Product  description:
The instrument uses computer technology, in line with GB / T 6062 and ISO, DIN, ANSI and JIS standards. When measuring the surface roughness of a part, place the sensor on the work pieces of the measured surface, the drive mechanism within the instrument glides the sensor with constant speed along the surface to be measured, the sensor through the built-in sharp stylus detect the measured surface roughness.
At this point stylus displacement due to the workpiece surface roughness caused the inductance change of the sensor, which in the phase-sensitive rectifier output the analog signal of the measured surface roughness. After amplification and level conversion the signal into the data acquisition system, the DSP chip will filter and calculate the collected data. The measurement results will then display on the LCD, at the same time connect with the PC for communication, data analysis and printing.

• Multi-parameter measurement: Ra, RZ

• High-precision inductance sensor

• Mechatronics design, small size, light weight, easy to operate

• Automatic shutdown function

• Metric / Imperial conversion function

• Communicates with the PC using “USB data cable output” and “RS-232 data cable output”

• Optional: Bluetooth data output

 
Product parameters:

• Display: blue backlight, 4-digit display, 10mm LCD

• Measurement parameters: Ra, Rz

1. Measuring range: Ra: 0.05 to 10.00μm Rz: 0.1 to 50.0μm

• Accuracy: ≤ ±15%

• Indicator Fluctuation: not more than 10%

• Sensor:

1. Measuring principle: Inductance Type

2. Stylus tip radius: 10 μm

3. Material: Diamond

4. Force measurement: 16Mn (1.6gf)

5. Stylus tip angle: 90°

6. Longitudinal semi-by: 48mm

7. Maximum drive stroke: 12.5mm / 0.5inch

8. Sampling length (optional): 0.25mm, 0.8mm, 2.5mm

• Drive speed:

1. When measuring: Vt = 0.135mm/s for sample length = 0.25mm

2. When sampling length = 0.8mm, Vt = 0.5mm/s Vt = 1mm/s for sample length = 2.5mm

3. When returning: Vt = 1mm/s

• Resolution:

1. 0.001μm (measured value <10μm)

2. 0.01μm (10μm ≤ measurement ≤ 100 μm)

3. 0.1μm (measurement ≥ 100μm)

• Evaluation Length (Ln): 1 ~ 2L optional

• Working environment: Temperature: 0 ~ 50°C Humidity: <80% RH

• Power: 4 x AA batteries

• Dimensions: 128 x 80 x 30mm

• Weight: 280g

 
Standard accessories:

• 1 Roughness Tester

• 1 x Screwdriver

• 1 x Standard template

• 1 x Standard sensor

• 1 x Carrying case

• 1 x Operation Manual

 
Optional accessories:

• USB or RS232C online cable and software

• Bluetooth devices and software